Printing a photo at an exact size, without shrinking it
You built the file to the exact millimetre spec. You printed it. It came out 4 mm too narrow and the office rejected it. Nothing was wrong with the image — the printer quietly rescaled it, because that is what printers do by default.
If the file is not made yet, the ID photo tool crops to a document spec and exports at the exact pixel dimensions, which is the half of the problem that software can solve.
The other half is the print dialog, and it is covered below.
Why the print comes out the wrong size
Print dialogs are designed for documents, not for exact physical reproduction. Their default behaviour is to make the content fill the paper, which is helpful for a text page and destructive for a photo that must be 35 mm wide.
Three settings conspire, and all three have to be right:
| Setting | What to choose | What goes wrong otherwise |
|---|---|---|
| Scaling | 100% or Actual size — never "Fit to page" | The image is stretched or shrunk to the paper margin, usually by a few percent |
| Paper size | Whatever the printer actually holds | A mismatch triggers automatic scaling to "make it fit" |
| Borderless / fit | Off, if you need an exact size | Borderless mode enlarges the image slightly so it bleeds off the edges |
The scaling error is usually small — two to five percent. On a 35 mm photo that is 1 to 2 mm, which sounds trivial and is exactly the kind of error that gets a document rejected.
The setting that matters most
Every print dialog has one, and it is worded differently in each:
- Windows, most apps — a Scale dropdown, or Fit versus Actual size radio buttons
- Windows Photos app — More settings, then look for Fit picture to frame and untick it
- macOS — in the print sheet, Scale set to 100%, and Scale to Fit left unticked
- Chrome and Edge — Scale: Default becomes Custom 100, and Fit to page unticked
- Acrobat — Actual size, not Fit, and untick Choose paper source by PDF page size
Wording moves between versions. The reliable rule: if the dialog offers a percentage, set it to 100. If it offers "fit", "shrink", or "scale to fit", turn it off.
Print a test sheet first
Before committing to the real photo, print the layout on plain paper and measure it with a ruler. This costs one sheet and catches every scaling error at once.
- Put an ordinary A4 or Letter sheet in the printer.
- Print the same file with the settings above.
- Measure the width with a ruler.
- Compare against the spec. On a 35 mm photo, anything outside 34.5 to 35.5 mm means a setting is wrong.
If it is consistently off by the same proportion, the culprit is scaling. If it is off by a fixed amount, look at margins. If it is off only on one axis, the image aspect ratio does not match the paper and something is stretching it.
Paper, and the margin problem
Most home printers cannot place ink within about 3 mm of the paper edge. That is a hardware limit, not a setting. It creates a specific problem for ID photos, which usually need a small white border anyway — but it breaks anything that must bleed to the edge.
Two practical workarounds:
- Print on larger paper and cut. Put a 35 × 45 mm photo on an A4 sheet with crop marks, print at 100%, and cut with a ruler and blade. This is the most reliable method and what print shops do.
- Use borderless mode only if the printer genuinely supports it. Many advertise it and then silently apply a small enlargement to guarantee coverage, which defeats the point.
Cutting accuracy matters as much as printing accuracy. A 1 mm error in cutting is as fatal as a 1 mm error in scaling. Print a thin guide box exactly on the trim line — most tools can draw one — and cut along the inside of the line rather than estimating.
When the printer driver overrides you
Some drivers apply their own scaling on top of the application's. Symptoms: the application says 100%, and the print is still wrong by a consistent few percent. Where to look:
- Printer properties — a Scaling or Reduce/Enlarge field that defaults to something other than 100%
- "Print quality" versus "Photo" modes — some photo modes quietly add an unprintable-margin compensation
- Duplex or booklet options — these can impose their own layout scaling
If a test sheet is consistently 2-4% off no matter what the application says, the driver is the remaining suspect, and printing from a different application is the fastest way to confirm it.
What to do when the photo must be exact
A short checklist that covers the whole path:
- Build the file at the exact pixel count for the requested physical size and resolution. For a 35 × 45 mm photo at 300 dpi that is 413 × 531 pixels.
- Print at 100%, not fit-to-page, and not borderless unless the printer truly supports it.
- Print a plain-paper test and measure it before using photo paper.
- Cut to a printed guide line, not by eye.
- Measure the final result. The spec exists because someone will measure it.
Related
- DPI to pixels conversion table — the pixel counts for each print size
- What 300 dpi actually means
- Make an ID or passport photo at an exact size
- Passport photo requirements: size, background, head height
- Resize product photos to exact pixel dimensions
- All guides
Print dialog wording and driver behaviour differ by application, operating system, and printer model, so the labels above describe what to look for rather than an exact path. The plain-paper test is the only step that works regardless of which of those you have.